Made in USA
MFR-2300 is a proprietary, highly effective, medium charge, high molecular weight anionic friction reducer. MFR-2300 is a single component emulsion polymer. No alkyl phenol ethoxylates (APE or NPE) are used in the manufacture of MFR-2300, making it environmentally friendly.
Product Application
MFR-2300 can be pre-diluted with water prior to use, but is usually added on the fly. The on-the-fly addition reduces waste and disposal costs. Typical dose rates range from 1/8 - 1/2 gpt.
Advantages
MFR-2300 is an anionic friction reducer that will reduce friction pressures by as much as 80% when compared to untreated fresh water
Physical Properties
| pH: | 6 – 8 | Density: | 8.37 lbs/gal |
|---|---|---|---|
| Flash Point: | >100° C / >200° F | Appearance: | Opaque, White Emulsion |
| Pour Point: | NA | Odor: | Slight Hydrocarbon |
| Specific Gravity: | 1.01 | Solubility: | Water |
| Viscosity: | 500 - 1400 cps | Charge: | Anionic |
Product Handling & Storage
MFR-2300 should be stored between 40° and 90°F and protected from freezing. If freezing occurs, the product should be warmed to 40° to 90°F and agitated prior to use. The shelf life is at least 6 months in unopened containers.
Very slight separation may occur upon standing. Containers should be rolled prior to use. Product rotation is recommended to avoid prolonged storage times.